Class T Amplifier

Last Edited: Dec 27, 2023

What Is a Class T Amplifier?

A class-T amplifier is an audio amplifier IC design. Rather than being a separate "class" of the amplifier, class-T is a registered trademark for Tripath's amplifier technologies. The control signals in class-T amplifiers may be computed using digital signal processing or fully analog techniques. The covered products use a class-D amplifier and proprietary techniques to control pulse width modulation. In this way, they produce better performance than other class-D amplifier designs. Among the publicly disclosed differences is real-time switching frequency control, depending on the input signal and amplified output. One of the amplifiers, the TA2020, was named one of the twenty-five chips that shook the world by the IEEE Spectrum magazine.  

Digital or Analog

You can compute the control signals in class-T amplifiers using digital signal processing or fully analog techniques. Currently, available implementations use a loop similar to a higher-order Delta-Sigma (ΔΣ) (or sigma-delta) modulator, with an internal digital clock to control the sample comparator. The two critical aspects of this topology are that (1) it takes the feedback directly from the switching node rather than the filtered output, and (2) the higher-order loop provides much higher loop gain at high audio frequencies than possible in a conventional single-pole amplifier. Financial difficulties caused Tripath to file for Chapter 11 bankruptcy protection on 8 February 2007. Cirrus Logic purchased Tripath's stock and intellectual property later that year.  

Signal Processing Circuit

A signal processing circuit includes a frequency-selective network in a feedback loop for noise-shaping purposes. Moreover, the sampling analog-to-digital converter in the feedback loop operates at a sampling frequency substantially above the Nyquist frequency. A sampling analog-to-digital converter drives the switching device. It produces a continuous-time output signal which feeds back to the frequency selective network for noise and distortion correction in the feedback loop. This is in contrast to traditional techniques that employ only state feedback. You can also use the state feedback (i.e., digital or sampled) of the output of the analog-to-digital converter in combination with the continuous-time feedback of the switching device output.  

Source Text

교육

음악 프로덕션 마스터

기초부터 완성 트랙까지 이끄는 전문가 코스.

House Boot Camp 앨범 아트 이미지.

HOUSE바운시 베이스와 탄탄한 킥부터, 이 코스는 성공하고 돋보이기 위한 가장 현대적인 House 프로덕션 테크닉을 가르칩니다.

Trap Boot Camp 앨범 아트 이미지.

TRAP뻔한 Trap처럼 들리지 마세요—극동의 힌트를 담은 월드한 사운드를 만드세요. 에스닉 사운드스케이프로 Trap을 한발 앞서게 합니다.

Ambient Boot Camp 앨범 아트 이미지.

AMBIENT편안하고 세련된 psy-영향 앰비언트를 제작하세요. 듣기에도 몽환적이고 편안한, 리스너를 Zen에 두는 명상적 사운드스케이프를 만드세요.