This is the featured image of the Creating a Vibrato-Rise Patch Using BEAP (MAX) blog article.

Creating a Vibrato-Rise Patch Using BEAP (MAX)

Last Edited: Nov 13, 2023

This article will provide a step-by-step tutorial to create a vibrato-rise patch using BEAP. This means that this is not going to be a standard vibrato patch. The rise in pitch will lead to a faster vibrato.  

What Is Vibrato?

Vibrato is a rapid but slight variation in pitch while holding a not-for-longer duration. It can be produced using an instrument, voice, or both.   Here is a step-by-step tutorial on how to create a Vibrato rise patch using BEAP:

STEP 1: Pull out the following modules from BEAP and alter their settings as shown.

There will be a small 'b' symbol on the left side of the screen, which you can click to search for the following modules:  

  • Oscillator
      
  • Choose the 'sine' wave.
  • Set CV2 to 10.2 %
  • Offset to 9.47 %
  • Keyboard

    No change in settings.  
  • ADSR
      
  • Attacks: 50 ms
  • Decay: 50ms
  • Sustain: 70%
  • Release: 500ms
  • VCA (Voltage Controlled Amplifier)

    No change in settings.  
  • Stereo

    No change in settings.  
  • CV LFO (Low Frequency Oscillator)
  • Phase: 0.00
  • Rate: 6.44Hz
  • CV Amount: 100 %

Importance of the 'CV LFO'

As the name suggests, this is a low-frequency oscillator with a CV input. This provides the vibrato to the sound by going into the CV2 input of the Oscillator. The 1v/oct output of the keyboard goes into the CV input of the LFO, hence controlling the intensity of vibrato via the pitch change.    

STEP 2: Patch all the modules according to the following instructions, referring to the picture below 

  • Put the 1v/oct out of the keyboard into the CV1 input of the Oscillator.
  • Put the 1v/oct out of the keyboard into the CV input of the CV LFO.
  • The gate out of the keyboard goes into the ADSR Gate.
  • The signal out of the CV LFO goes into the CV2 input of the Oscillator.
  • The oscillator signal goes into the signal in of VCA.
  • The signal out of ADSR goes into CV in of VCA.
  • The VCA output goes into the stereo's left and right inputs.

The patch is ready; as soon as you press the keys on the keyboard, the vibrato starts; the higher the pitch, the more intense the vibrato becomes.

교육

음악 프로덕션 마스터

기초부터 완성 트랙까지 이끄는 전문가 코스.

House Boot Camp 앨범 아트 이미지.

HOUSE바운시 베이스와 탄탄한 킥부터, 이 코스는 성공하고 돋보이기 위한 가장 현대적인 House 프로덕션 테크닉을 가르칩니다.

Trap Boot Camp 앨범 아트 이미지.

TRAP뻔한 Trap처럼 들리지 마세요—극동의 힌트를 담은 월드한 사운드를 만드세요. 에스닉 사운드스케이프로 Trap을 한발 앞서게 합니다.

Ambient Boot Camp 앨범 아트 이미지.

AMBIENT편안하고 세련된 psy-영향 앰비언트를 제작하세요. 듣기에도 몽환적이고 편안한, 리스너를 Zen에 두는 명상적 사운드스케이프를 만드세요.