M-S Recording Technique

Last Edited: Dec 27, 2023

The "Mid/Side," or M-S recording technique, was first designed by EMI engineer Alan Blumlein. He invented the method in 1933 for some of the first stereophonic recordings. The M-S microphone recording technique is commonly used in broadcasts, mainly because M-S tracks are mono-compatible when adequately recorded. M-S is also a common studio recording technique, and its simplicity and versatility make it a good option for live recording. The M-S recording technique consists of two microphones. One directional cardioid, or hyper-cardioid mic, M, and a bidirectional microphone, S. The former points to the source, and the latter has its front and back pointing towards the sides, perpendicular to the directional mic's angle. Microphones should be as close as possible without touching.

M-S has outstanding mono performance, and in the right conditions, it can be the best way to capture the space and ambient of a room while keeping compatibility. This can even sound more realistic than a separated pair in many situations. However, when the source is particularly big, it can often take too much distance to get the whole section or choir into perspective using this technique. Several spot mics should be used in such a case. As general advice, for best placement, we should walk around the room and listen to where the instrument or source sounds best. It's important to note the balance of instrument and room sound and the stereo image. Once the right spot is found, we can set up the mics. The M should go first since it will be our primary mic. The bidirectional comes after to create the stereo image.

Decoding the M/S Signal

A stereo speaker system needs a "decoding" method to translate the M-S recording technique correctly. It's a consequence of how the bidirectional mic captures sound. The directional, on the one hand, produces a "positive" voltage all the way around. The bidirectional generates a positive voltage from sources coming from its front and a negative voltage from its back, albeit the signal is still mono. If we intend to use it to add stereo wideness, we need to decode the signal in the following way: On one mixer channel, we should bring up the "M" signal. Pan it dead center. Next, we must bring up the "S" bidirectional on two additional channels. They were exact copies but panned hard left and hard right. One of these channels should have its phase flipped. Only then will it serve the purpose of adding stereo differences, thus creating stereo wideness. Both S channels can then be balanced as a group against the M signal for more or less effect. Additionally, devices such as "M-S encoders" allow for avoiding this manual decoding process.

교육

음악 프로덕션 마스터

기초부터 완성 트랙까지 이끄는 전문가 코스.

House Boot Camp 앨범 아트 이미지.

HOUSE바운시 베이스와 탄탄한 킥부터, 이 코스는 성공하고 돋보이기 위한 가장 현대적인 House 프로덕션 테크닉을 가르칩니다.

Trap Boot Camp 앨범 아트 이미지.

TRAP뻔한 Trap처럼 들리지 마세요—극동의 힌트를 담은 월드한 사운드를 만드세요. 에스닉 사운드스케이프로 Trap을 한발 앞서게 합니다.

Ambient Boot Camp 앨범 아트 이미지.

AMBIENT편안하고 세련된 psy-영향 앰비언트를 제작하세요. 듣기에도 몽환적이고 편안한, 리스너를 Zen에 두는 명상적 사운드스케이프를 만드세요.